Method

How I did it.

Thirteen decisions, in the order I made them. Some of them are about what to build. More of them are about what to throw away.

01

Pick a small, honest scope.

New wired IEMs sold in India at or under ₹10,000; Type-C and 3.5mm ranked separately; sold-out kept unless discontinued.

The two plugs are ranked separately because they are different products at different prices. 210 of the415 were in stock on 2026-11-11.

02

Score sound with one published model.

Sound is the Harman in-ear predicted preference model and nothing else. It is a peer-reviewed formula that predicts how much listeners will like an IEM's tuning from its measured frequency response.

100.08 - 8.5*SD - 6.80*|slope| - 3.48*mean_abs_error (error vs Harman IE target, 20 Hz-10 kHz)

Three things cost points: an uneven response, a tilt away from the target, and plain distance from it. Try it.

Load a real IEM:

Showing CCA PLA13.

1.96 dB −16.7
+0.04 −0.3
1.39 dB −4.8
2 −3.5
Harman score
78.3
After the margin of error
74.8
Sound points, out of 60
41.8

Sound points scale the adjusted score from 40 (zero points) to 90 (full points). A proxy measurement loses 5 more.

One model, one caveat. In the Harman research, about 72% prefer Harman-like tuning; about 28% prefer ~2 dB less bass and 1-2 dB more treble. That group gets advice, not a separate ranking: favour IEMs with a slightly positive tilt.

03

Use measurements other people already made.

The frequency responses come from public squig.link databases, compiled by the open-source Squig-Rank project. All of them use 711-type couplers. I recompute the score from three numbers per measurement: unevenness, slope and mean error.

  1. Each measurermay measure one IEM several times. Take the median.
  2. Across measurerstake the median again. One loud outlier cannot swing the score.
  3. One score per IEMwith a count of who measured it, and credit.

How many people measured each IEM

Number of IEMs by number of independent measurers
MeasurersIEMs
1172
281
346
418
515
69
73
811
91
101
112
121

Most IEMs rest on one or two measurers. That is why step 09 exists. A further 55 have none.

04

Leave out the sources that said no.

Some of the best-known sources are missing on purpose. Each one either keeps its data private or asks not to be collected.

  • Amazonterms forbid scraping
  • HiFiNagerobots.txt blocks AI crawlers
  • Crinacle / graph.hangout.audioraw data not public
  • Crinacle ranking list, squig.link lists, IEMRanking.comrobots.txt blocks Claude
  • Redditbulk collection needs approval; research outside its programme not allowed
I respected every site's wishes.
05

Build a review pipeline. Then delete it.

  1. Store reviewsI built a fake-review detector: verified-buyer weighting, duplicate text, bursts, imported reviews.
  2. Enthusiast opinionReddit now requires approval for API access and forbids research outside its programme.
  3. Expert lists and forumsThey covered only about 10% of the IEMs. Opinions could not be scored fairly.
  4. DecisionMeasurements plus store facts only. No star ratings anywhere on this site.
06

Take store claims as claims.

If a store says an IEM has a "woody sound", that is recorded as a claim and never verified. The same goes for specs and box contents. Everywhere you see them on this site, they carry this label:

as claimed by the store

Specs, sound tags and box contents are as claimed by the store, not verified.

07

Let two AI agents argue the formula out.

I did not want to hand-pick weights and call it science. So one agent proposed a scoring formula and a second one attacked it. Both could use only the data. It converged in 2 rounds, about 22 minutes.

Round 1

ProposerHere is a full scoring spec: sound, hardware, box, a discontinued rule and a value metric.
CriticThree things block this.
  1. Your "no mic" flag is a store-formatting artifact. Stores disagree with each other about the same IEM.
  2. Your discontinued rule is circular. Sold-out rows vouch for each other.
  3. Your "value" metric is secretly a price ranking.

Round 2

ProposerFixed. An unstated mic is unknown, not "no". Discontinued now needs a real signal. Value is renamed and limited to good, in-stock IEMs.
CriticNothing blocking remains. Ship it.

The exchange above is condensed. The three fixes are real and each one changed the final formula.

08

Set default weights. Then check what they really do.

The defaults are sound 60, hardware 30, in the box 10. But a weight is not the same as influence. Sound scores vary a lot between IEMs; box contents barely do.

Nominal weight against effective influence on the ranking
PartWeightReal influence on the ranking
Sound6074 to 78%
Hardware3016 to 25%
In the box102 to 7%

The thin line is the weight. The thick bar is the share of the ranking it actually drives.

Sensible changes to the weights barely change the top 20. That is itself a finding. It only breaks when sound stops being the main ingredient.

How many of the default top 20 remain under other weights
Sound / hardware / box3.5 mmType-C
80 / 15 / 517 of 20 stay17 of 20 stay
70 / 20 / 1018 of 20 stay18 of 20 stay
50 / 35 / 1516 of 20 stay17 of 20 stay
34 / 33 / 337 of 20 stay14 of 20 stay

Try it with the sliders.

09

Build the doubt into the score.

Independent measurers disagree on the same IEM by a standard deviation of 4.94 points. So every score is reduced by a margin of error, √(24.4 ÷ measurers). One measurer costs 4.9 points. Four cost 2.5.

Points taken off, by number of independent measurers.

Do more measurers agree more?

Each dot is one IEM: the gap between its highest and lowest measurer, by number of measurers. The bar is the median. The gap widens as more people measure, because there are more chances to disagree. That is why the score uses the median, and why a single measurement earns less trust, not more.
Show this chart as a table
MeasurersIEMsMedian spread
2813.5
3468.4
4185.6
5159.5
699.4
7313.0
81111.6
9119.8
10116.9
1127.1
12116.4
  • Proxy A collab edition where only the base model is measured loses 5 more points.
  • Buyer beware An IEM with no measurement is scored at the bottom-quarter level of measured IEMs, 66.9. Unknown should not outrank known.
  • Noise Rigs, eartips and insertion depth change measurements; treat +/-3 points as noise.
10

Refuse to fit a curve that is not there.

The usual way to find value is to fit a price curve and see who beats it. Here the R² of Harman score against log price is 0.001 for 3.5 mm and 0.008 for Type-C. There is no curve to beat.

So value is simple and says what it is:

percentile(score) - percentile(ln price), per plug, measured IEMs (in stock or sold out) in the top half by score only

11

Do not punish a store for writing less.

Some stores list every accessory. Others write two lines. If a missing spec counted as "no", the product would sink because of the store's copywriting. So a missing item gets the average rate for that item, not zero.

  • Yesfull points
  • Nozero
  • Not statedthe average rate
12

Remove an IEM only on a real signal.

Sold out is not the same as discontinued. An IEM is removed only if there is a clearance tag or a newer version in stock. 19 were removed. Everything else that is sold out stays, with a flag.

See the 19 removed IEMs
IEMPlugWhyHarmanLast price
7Hz Aero3.5 mmstore clearance tag84.8₹890
KZ x Angelears Libra3.5 mmstore clearance tag83.8₹990
Tripowin x HBB Kailua3.5 mmstore clearance tag83.1₹3,990
Kiwi Ears Canta3.5 mmstore clearance tag79.8₹5,699
Aful MagicOne3.5 mmstore clearance tag78.5₹8,990
Juzear 41T3.5 mmstore clearance tag78.2₹9,490
Kinera Celest Relentless3.5 mmstore clearance tag76.3₹7,990
NiceHCK F1 Pro3.5 mmstore clearance tag75₹5,990
JoyOdio Shine3.5 mmstore clearance tag72.9₹3,490
Kinera Celest Plutus Beast3.5 mmstore clearance tag72.2₹6,490
Twistura Sigma3.5 mmstore clearance tag72.1₹4,490
ND Nice3.5 mmstore clearance tag70.8₹1,290
Rose Technics QuietSea3.5 mmstore clearance tag68.8₹3,490
Final E5003.5 mmstore clearance tag65.5₹1,499
Final E500Type-Cstore clearance tag65.5₹2,499
Audiocular LEXType-Cstore clearance tag64.1₹1,149
ND DD33.5 mmstore clearance tag59.5₹790
KZ ZAT3.5 mmstore clearance tag55.2₹5,990
Tanchjim Ola3.5 mmnewer version in stock: Tanchjim Ola II48₹3,699

'Sold out, status unclear' items may in fact be discontinued; there is no stock history.

13

Make every number reproducible.

  1. Collect politelyRate-limited requests to public store feeds from Headphone Zone, The Audio Store and Concept Kart.
  2. Read the pages455 product pages read by parallel AI agents for specs and box contents.
  3. Match and scoreEach product is matched to its measurements, then scored by script.
  4. PublishThree JSON files. This site reads them and nothing else.

Raw frequency-response curves are not redistributed; only derived numbers, with credit to each measurer.

Explore the rankingsRead the write-up (PDF)LinkedIn